Filtering FMU or SO Codes

Fire Management Unit (FMU) and Strategic Objective (SO) codes are the identifiers used to link spatial data for FMUs to the strategic objectives and management requirements entered in WFDSS. You can filter FMU codes based on the following states:

• Never Activated
• Active
• Inactive

To filter FMU or SO codes:

1. Choose Data Management > FMU/SO Codes. The FMU/SO Codes page appears.
2. Select the Geographic Area, Agency, and Unit that you want to find an FMU code for.
3. Scroll down to the Filter section and expand the box if needed.
4. Check or uncheck the Never Activated, Activated, and/or Inactive check boxes.
5. Click Apply Filter. The FMU/SO Codes page refreshes and displays the filtered results.

If nothing appears in the FMU Code table after you apply the filter, modify your filter parameters to make them less restrictive.

Note: SO codes do not have a filter.

-----------
Last updated on 5/20/2013 12:05:27 PM.

In This Section Data Management Overview To filter FMU or SO codes:

See Also Fire Management Unit (FMU) or Strategic Objective (SO) Codes Strategic Objectives and Management Requirements Unit Fire Planning Map Layers Entering Strategic Objectives and Management Requirements Setting up FMU or SO Codes Activating an FMU or SO Code Editing FMU or SO Codes Deactivating an FMU or SO Code Deleting FMU or SO Codes Viewing Strategic Objectives Viewing Data Management Change History Data Management Filters Managing Data Management Notes Exporting, Importing, or Deleting Planning Processes

Reference Field Descriptions Glossary Resources Spatial Data Reference Landscape Data Source Reference Relative Risk Reference Organization Assessment Reference Fire Behavior Reference About the WFDSS Decision Editors